Y-1200 & Y-400 Documentation Updates:
Facebook Build Group: www.facebook.com/groups/FurtherLaser
24th April 2021
Updated the Y1200 and Y400 Documentation. If you have bought the old versions, please email me with your order number at “rob@furtherfabrication.com” and I’ll send you out this new one. (Due to my email backlog, this may take several days)
29th May 2020
I’ve updated the Docs with some corrections and clarifications. Send me an email with your order number at rob@furtherfabrication.com if you’d like a copy. (Please don't stress if you've already finished or are in the process of building, this update does not have any significant design or parts changes.)
The z-axis smooth rods/linear bearings shown in Episode 3 turned out not to be necessary. That’s why they disappear in later episodes and are not included in the Build Guide or Parts List.
24th Jan 2020
Y-400 Parts List. There needs to be 2x 875mm 2040, not the 1x that was originally stated.
22nd Dec 2019
Y-1200 Parts List & Build Guide typo. The Acrylic/Polycarbonate Panel on the front of the lid should read as 1410x165mm not 935x165mm.
15th Dec 2019
Y-1200 and Y-400 Build Guide. Page 27. The 2x m5 26mm bolts should be trimmed down from extra 30mm bolts.
10th Dec 2019
When ordering the red dot laser mount for the nozzle, get the 24mm not the 25mm.
23rd Nov 2019
Thanks to Jonathan for letting me know:
All reference to 4020 Aluminium Extrusion should be read as 2040 Aluminium Extrusion.
13th Nov 2019
Thanks to Chris for spotting this:
In the Y-1200 Build Guide, Page 33. The table of parts has an extra 2x Cube Connectors in the bottom row. Just ignore those.
In the Y-400 Parts List. Row 43. I found a better option for the closed loop belt. 2GT-2220mm 6mm wide.
12th Nov 2019
In the Y-1200 Parts List. Aluminium Profiles. There are two instances of 170mm 2020. The 1x 170mm should be a 4020 piece of 170mm t-slot, while the 2x 170mm 2020 should be 4x 170mm 2020 T-slot. This is also missing from the 9.1 diagram and table in the Y-1200 Build Guide.
When ordering the V-Wheels, my preference would be 4x Set C and 4x Set D
11th Nov 2019
Thanks to Joe for spotting this one:
In the Y-1200 Build Guide on page 33, I’d missed that one of the ‘D’ lengths was actually 935mm NOT 955mm Please see the amended pages 33 and 39. DOWNLOAD
10th Nov 2019
Clarification in the Y-1200 & Y-400 Parts Lists. The Aluminium profiles are in millimeters(mm). So for example, for the V-Slot, 2 1500 means two length of 1500mm V-Slot are needed.